Thin Veneer
Ash Cliff
Ash Cliff is a “chopped” product, created by sending slabs of stone through a hydraulic splitter. The result is a chopped ledge piece that reveals the inside of the stone. These chopped ledge pieces are then sent through a veneer saw to create the finished product. The colors tend to be cream, gray and silver with horizontal lines running through some pieces.
Product Specs:
PRODUCT TYPE: Thin Veneer
COVERAGE: +/- 100 sq. ft. or +/- 200 sq. ft. pallets
AVERAGE WEIGHT: 100 sq. ft. pallets = +/- 0.70 tons or 1400 lbs.
200 sq. ft. pallets = +/- 1.40 tons or 2800 lbs.
DIMENSIONS: 1″ – 5″ face height; 6″ – 24″ length
PACKAGING TYPE: Wire wrapped, stacked flat on pallets
AVAILABILITY: In Stock, larger orders may require lead time
Dimensional Ashlar
Dimensional Ashlar is a strip veneer that is sawn on all four edges. It has a clean, modern appearance and is designed to make installation much easier and faster than our other thin veneer products. The color range covers a broad spectrum of earth tones similar to those found in our flagstone products.
Product Specs:
PRODUCT TYPE: Thin Veneer
COVERAGE: +/- 100 sq. ft. or +/- 200 sq. ft. pallets
AVERAGE WEIGHT: 100 sq. ft. pallets = +/- 0.70 tons or 1400 lbs.
200 sq. ft. pallets = +/- 1.40 tons or 2800 lbs.
DIMENSIONS: 2.5″, 5″, and 7.5″ face heights, 6″ to 30″ lengths
PACKAGING TYPE: Wire wrapped, stacked flat on pallets
AVAILABILITY: In Stock, larger orders may require lead time
Rustic Cottage - Discontinued until further notice
This thin veneer is split from the face of natural creek stone. It’s rounded edges and corners give the look of full bed depth creek stone while maintaining all the application bonuses of thin veneer.
Product Specs:
PRODUCT TYPE: Thin Veneer
COVERAGE: +/- 100 sq. ft. or +/- 200 sq. ft. pallets
AVERAGE WEIGHT: 100 sq. ft. pallets = +/- 0.70 tons or 1400 lbs.
200 sq ft pallets = +/- 1.40 tons or 2800 lbs.
DIMENSIONS: Random shapes; 2″ x 2″ up to 8″ x 12″
PACKAGING TYPE: Wire Wrapped, stacked flat on pallets
AVAILABILITY: Limited Availability
Sunset Ledge
Sunset Ledge is sawn from Ledge stone creating a thin veneer version. A variety of earth-tone colors provide a natural and beautiful finish.
Product Specs:
PRODUCT TYPE: Thin Veneer
COVERAGE: +/- 100 sq. ft. or +/- 200 sq. ft. pallets
AVERAGE WEIGHT: 100 sq. ft. pallets = +/- 0.70 tons or 1400 lbs.
200 sq. ft. pallets = +/- 1.40 tons or 2800 lbs.
DIMENSIONS: 1″ – 5″ face height; 6″ – 24″ length
PACKAGING TYPE: Wire wrapped, stacked flat on pallets
AVAILABILITY: In Stock, larger orders may require lead time
Diamondback
Diamondback thin veneer is a cost-effective natural strip veneer. Two naturally straight edges promote uniformity in application. A good variety of widths and lengths provide a natural look to the finished application.
Product Specs:
PRODUCT TYPE: Thin Veneer
COVERAGE: +/- 100 sq. ft. or +/- 200 sq. ft. pallets
AVERAGE WEIGHT: 100 sq. ft. pallets = +/- 0.60 tons or 1200 lbs.
200 sq. ft. pallets = +/- 1.20 tons or 2400 lbs.
DIMENSIONS: 1″ – 6″ face height; 6″ – 36″ length
PACKAGING TYPE: Wire wrapped, stacked on pallets
AVAILABILITY: In Stock, large orders may require lead time
Diamondback Jumpers
Diamondback Jumpers are a larger version of Diamondback thin veneer. Jumpers have two naturally straight edges and work well alone or in combination with other strip veneers. Larger widths and lengths increase coverage and decrease busy joints. Diamondback Jumpers are the thin veneer version of our Rectangular Builders.
Product Specs:
PRODUCT TYPE: Thin Veneer
COVERAGE: +/- 100 sq. ft. or +/- 200 sq. ft. pallets
AVERAGE WEIGHT: 100 sq. ft. pallets = +/- 0.55 tons or 1100 lbs.
200 sq. ft. pallets = +/- 1.10 tons or 2200 lbs.
DIMENSIONS: 6″ – 14″ face height; 10″ – 36″ length
PACKAGING TYPE: Wire wrapped, stacked flat on pallets
AVAILABILITY: In Stock, larger orders may require lead time
Desert Rust
This random shape thin veneer sports an array of earth tone colors and high contrast. It can be used alone or mixed with any of our other thin veneers for a custom look. Desert Rust and Morning Mist thin veneers are the best value out of all our thin veneers.
Product Specs:
PRODUCT TYPE: Thin Veneer
COVERAGE: +/- 100 sq. ft. or +/- 200 sq. ft. pallets
AVERAGE WEIGHT: 100 sq. ft. pallets = +/- 0.60 tons or 1200 lbs.
200 sq. ft. pallets = +/- 1.20 tons or 2400 lbs.
DIMENSIONS: Random shapes; 3″ x 4″ up to 10″ x 12″
PACKAGING TYPE: Wire wrapped, stacked flat on pallets
AVAILABILITY: In stock, large orders may require lead time
Morning Mist
This random shape thin veneer captures the cool silvers and light tans of a misty morning. It can be used alone or mixed with any of our other thin veneers for a custom look. Desert Rust and Morning Mist thin veneers are the best value out of all our thin veneers.
Product Specs:
PRODUCT TYPE: Thin Veneer
COVERAGE: +/- 100 sq. ft. or +/- 200 sq. ft. pallets
AVERAGE WEIGHT: 100 sq. ft. pallets = +/- 0.60 tons or 1200 lbs.
200 sq. ft. pallets = +/- 1.20 tons or 2400 lbs.
DIMENSIONS: Random shapes; 3″ x 4″ up to 10″ x 12″
PACKAGING TYPE: Wire wrapped, stacked flat on pallets
AVAILABILITY: In stock, large orders may require lead time